
Unit Configuration
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
68
The VLAN tab is comprised of the following components:
2.7.2.1 General
Ethernet Link Type: From the dropdown list, select the functionality of the
unit's VLAN-aware capability, from the following options:
Access (available to SUs only): Transfers frames while tagging/untagging
them as all devices connected to it are VLAN-unaware. The unit cannot
transfer tagged frames.
Trunk: The unit only will transfer tagged (Customer VLAN ID tag) frames,
as all devices connected to it are VLAN-aware.
Hybrid: The device will transfer both tagged (Customer VLAN ID tag) and
untagged frames as the devices connected to it can be either VLAN-aware
or VLAN-unaware.
Service Provider: The device will transfer both single-tagged frames
(Service Provider VLAN ID tag) and double-tagged frames (Service Provider
VLAN ID tag + Customer VLAN ID tag). The Service Provider tag includes
the Service Provider VLAN ID and the VLAN QinQ Ethertype.
VLAN ID - Data (SU only): Applicable for Access links only. The VLAN ID for
data frames, which identifies the VLAN to which the Subscriber Unit belongs.
The available values range from 1 to 4094.
VLAN ID - Management: The VLAN ID that identifies remote stations for
management purposes. This applies to all applications using management
protocols such as SNMP, TFTP, DHCP, ICMP (ping) and Telnet. All stations
must tag the management frames with the defined ID number. The available
values range from 1 to 4094 or 65535 if there is no VLAN.
2.7.2.2 Priority
Management: The value of the user priority field for management frames in
units where the VLAN ID - Management is not set to 65535. The available
values range from 0 to 7.
Data (SU only): Applicable to Access links only. From the dropdown list,
select the value of the user priority field for data frames transmitted to the
wireless link.
The available values range from 0 to 7.