Getting Started
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
8
To set an IP address:
1 In the toolbar, click
, or select Set IP from the Tools menu. The Set IP
window is displayed, as shown below.
Figure 1-4: Set IP Window
2 In the MAC Address field, enter the unit’s MAC address.
3 In the IP Address field, enter the required IP address for the unit.
4 In the Subnet Mask field, enter the required subnet mask.
5 In the Default Gateway field, enter the unit’s default gateway.
6 Click on
to activate the changes. The unit will be reset automatically.
NOTE
In order to see the unit after assigning the IP address, the assigned IP address must be on the
same IP subnet as the management station of the BreezeCONFIG utility. Otherwise, use the
Locate Device feature, as described in section 1.3.2, to find the unit.
1.3.4 Opening a web-browser for a selected device
The HTTP Browser feature enables immediate access for http-based management
of devices with a built-in web-interface, such as Gateways or WI
2
Access Points.
To open an http browser for a selected device:
1 In the toolbar, click
. The Enter IP Address window is displayed,.
2 Enter the IP address of the device you wish to manage using an http browser,
and click OK.
3 An http browser to the selected address will be opened, enabling web-based
management of the selected device.
