Unit Configuration
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
100
Associated SU MAC Address: Applicable only to AU traps where an
associated SU is involved. The MAC address of the associated SU.
Associated AU MAC Address: Applicable only to SU traps where an
associated AU is involved. For example, association traps. The MAC address of
the associated AU.
Parameter Changed: Displays the type of parameter modified during a
configuration change. This can include IP Filter or VLAN.
IP Address of Telnet User: Displays the IP address of a management station
logged in to the relevant unit for management purposes via Telnet.
Access Rights: Displays the access level of the user logged via the monitor
port or Telnet, if applicable.
Toggle: On or off, if applicable.
RTx (%): Applicable to AU only when the number of retransmissions as a
percentage of total transmissions has changed below or above the threshold
defined by the Wireless Trap Threshold parameter. Indicates the most
recently measured number of retransmissions as a percentage of total
transmissions.
Login/Logout: Displays each time a user logs in or out of the monitor
application via Telnet.
FTP/TFTP Session Status: The status of the last FTP/TFTP loading process.
DFS New Frequency: Applicable only to AU with the DFS Option enabled.
The new frequency in MHz after detecting radar on a previous channel.
SW Version: Applicable to a trap indicating that an SU with SW version below
4.0 tries to associate with an AU using SW version 4.0 or higher, with the
Wireless Link Prioritization Option enabled. This is the SW Version of the SU.
To define the Default Traps File Name:
If the number of entries reaches 5000, the current contents are saved to a log file
and the Trap Monitor is cleared. Click the
icon to open a dialog box for
defining the name and location of the Default Traps File Name.
To clear the display:
Click
to clear the display.
