Unit Configuration
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
96
In order to get quick and reliable LQI measurements, there should be
sufficient traffic between the SU and the AU. It is recommended to have traffic
of at least 100 packets per second.
If Limited Test is indicated next to the LQI results, it means that the results
may not indicate the true quality since not all modulation levels from1 to 8
are available. The limitation may be due to the HW of the unit (HW Revision
A), or the applicable parameters in the country code, or the configurable
Maximum Modulation Level parameter.
To reset all Per Modulation Level Counters to zero:
Click
to revert all Per Modulation Level Counters to zero.
To refresh the display:
Click
to refresh the display.
2.11.5 Site Survey Per SU Counters Tab (AU)
The Per SU Counters tab displays information related to each of the associated
SUs.
Figure 2-39: Per SU Counters Tab - Access Unit
The Per SU Counters tab is comprised of a table that includes the following
information for each associated Subscriber Unit:
MAC Address: The MAC address of the SU.
Max Mod. Level: The value configured in the SU for the Maximum
Modulation Level parameter.
