Document History
BreezeACCESS 4900 vi System Manual
Sub-Band Select in SU
Section 4.2.6.2.4.1,
Section 4.2.6.2.13
Added/updated descriptions SW Version 4.5,
July 2007
MIR/CIR Parameters
Section 4.2.6.6.2
Improved description SW Version 4.5,
August 2007
Antenna specifications
Section 1.2.1
Updated compliance to ETSI standard (EN 302 326-3 V1.2.1
(2007-01)
SW Version 4.5,
August 2007
Correct Run-Time update of
Unit Control Parameters -
Parameters Summary
Appendix E
FTP Server IP Address, FTP Gateway IP Address, FTP User
Name, FTP Password are updated in run-time (reset not
required)
SW Version 5.0,
November 2007
Correct Run-Time update of
Air Interface Parameters -
Parameters Summary
Appendix E
Preferred AU MAC Address, Arbitration Inter-Frame Spacing
and Wireless Trap Threshold are not updated in run-time
(reset is required).
Sub-Band Select and Frequency are updated in run-time
(reset is not required).
Spectrum Analysis parameters are applicable in run-time
(configured per test)
SW Version 5.0,
November 2007
Correct Run-Time update of
Service Parameters -
Parameters Summary
Appendix E
MIR: Downlink, MIR: Uplink, CIR: Downlink, CIR: Uplink,
Maximum Burst Duration, MIR Threshold Percent, are
updated in run-time (reset is not required).
SW Version 5.0,
November 2007
Send Traps
Section 4.2.6.3.7.1
Traps are generated and sent only by AU (including traps on
behalf of associated SUs)
SW Version 5.0,
November 2007
Unit Control Menu
Section 4.2.3
Re-apply Country Codes Values option has been removed
(available in Basic and Advanced Configuration, Country
Code Parameters.
SW Version 5.0,
November 2007
Wi2 IP Address
Section 4.2.6.3.8
Updated name (was previously AP Client IP Address) SW Version 5.0,
November 2007
Basic Configuration Menu
Section 4.2.4
Added Country Code Parameters SW Version 5.0,
November 2007
Country Code Parameters
Section 4.2.6.8
New SW Version 5.0,
November 2007
Changed Item Description Version/
Date Issued
