Appendix E - Parameters Summary Parameters Summary
BreezeACCESS 4900 217 System Manual
*** Configurable only in units without an integral antenna.
E.1.4 Network Management Parameters
Pulse Detection
Sensitivity
AU, SU
Low
High
Low Yes
Noise Floor Calculation
Mode
AU, SU
Fully Automatic
Forced
Automatic with Minimum
Value
Fully Automatic Yes
Noise Floor Forced Value AU, SU -107 to -55 (dBm) 5 MHz bandwidth: -102
10 MHz bandwidth: -99
Yes
Select Calibration Option
to Use
AU, SU
None
Field
Factory (not available in
current version)
None Yes
Table E-4: Network Management Parameters
Parameter Unit Range Default Run-Time
Access to Network
Management
AU, SU
From Wireless Link Only
From Ethernet Only
From Both Ethernet and Wireless
Link
From Both
Ethernet and
Wireless Link
No
Network Management
Filtering
AU, SU
Disable
Activate Management IP Filter On
Ethernet Port
Activate Management IP Filter On
Wireless Port
Activate Management IP Filter On
Both Ethernet and Wireless Ports
Disable No
Set Network
Management IP Address
AU, SU IP address 0.0.0.0
(all 10 entries)
No
Table E-3: Air Interface Parameters
Parameter Unit Range Default Run-Time
