System Settings | 19
Color Depth-
All supported color depths for your monitor will be
listed in this dropdown box.
Enable Screen Blanking-
Checking this box will reveal two timeout
values for screen blanking and suspend time.
Once you are finished, press the
Apply
button for the changes to take
effect. If you selected
Auto-Detect
for the screen resolution, then the
change in resolution will occur on next reboot. Otherwise, all other
display changes will take effect immediately.
Dual Monitors
This section describes how to set up and configure dual monitors for
terminals that support them
1 While the unit is turned off, attach both monitors to the thin client.
2 Turn on the thin client.
3 From the DeTOS Desktop, select
DeTOS
Control Panel
.
4 Click the
Display
icon on the left-hand side of the
Control Panel
,
under System.
5 You will be presented with display settings for
Color Depth
and
Screen Blanking
options. These settings apply to both monitors
associated with the two video port.
6 To adjust specific properties for each monitor, click the
Monitors
button along the top of the
Control Panel
. You will then be
presented with the names of the two monitors attached to the
terminal. The exact names will vary depending on how they are
detected on that particular terminal.
(example:VN2110G)
