Installation Instructions (cont’d)
RG6 LED Signals – 12’’ (300mm) – Railway Grade Crossing
This product is intended solely for the use of rail signaling and is not intended for use in any other applications
NOTE: If you prefer to have this Installation
Instructions document in other languages, visit our
official website at: www.gelighting.com/installation
Check label for required
voltage
Ensure arrow ‘’’’ points
upward for proper beam
alignment
Risk of Electric Shock
Install unit in enclosure tested
to be suitable for wet locations
only.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3 • or • +1.216.266.2419
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory
conditions.
RAIL053- R130816
