F-44/2008
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
COMPONENT ORDERING LOGIC
As shown below, components can be ordered separately. The ordering log-
ic for components can be derived from the product ordering number logic
shown above each product grouping. The groupings explain the procedure
to derive component ordering numbers.
EXAMPLES:
COMPLETE UNIT NUMBER
NEMA TYPE
LIGHT BALLAST TRUNION BEAM SPREAD OPTICAL
PRODUCT ID. WATTAGE SOURCE VOLTAGE TYPE TYPE HORIZ X VERT REFLECTOR OPTIONS
XXXX XX X X X X X XXX XXX
51 M 5 A 4 PHD0PSFA
POWR •SPOT
®
FLOODLIGHTS
COMPLETE UNIT NUMBER
20-inch (508mm)
diameter glare
reduction reflec-
tor without door
POWR •SPOT
®
FLOODLIGHTS with Glare Reduction
BALLAST COMPONENT LOGIC
LIGHT BALLAST TRUNION
PRODUCT ID. WATTAGE SOURCE VOLTAGE TYPE TYPE OPTIONS
XXXX XX X X X X XXX
51 M 5 A PPSFD
OPTICAL COMPONENT LOGIC
NEMA TYPE
BEAM SPREAD OPTICAL
PRODUCT ID. HORIZ X VERT REFLECTOR
XXXX X XXX
C HDOPSFB
HPS
OPTICAL CHOOSE A,B,C,D,E FROM
COMPONENT 1500W 1000W 400W 1000W 400W 750W TABLE USING BEAM
LOGIC 51 01 40 01 40 75 SPREAD AND LAMP TYPE
A 2 2 1 N/A N/A N/A HD2 or GP2
B 3 3 3* N/A 3 3 GP0 or HD0
C 4 4 3 N/A 4 4
D 5 5 N/A N/A 5 5
E 6 6 6 5 6 6
NOTE: *Not standard. Better equivalent distributions exist . N/A = Not Available
MH
Choose reflector ID.
from Ballast and
Photometric Selection
Table on page F-9.
Decide whether to use
General Purpose (GP) or
Heavy Duty (HD) Optical
GP0 = General Purpose 20-inch
(508mm) Diameter Optical
HD0 = Heavy Duty 20-inch
(508mm) Diameter Optical
B = NEMA 3X3
C = NEMA 4X4
D = NEMA 5X5
E = NEMA 6X6
Note that this is also used as the reflector ID. It appears
on a decal on the outside bottom of each reflector and
can be seen from the ground.
OPTICAL COMPONENT LOGIC
NEMA TYPE
BEAM SPREAD OPTICAL
PRODUCT ID. HORIZ X VERT REFLECTOR
XXXX X XXX
C GPOPSGC
EXTERNAL GLARE REDUCTION LOUVERS
PS
IVGC
Internal Glare
Reduction Louvers or
External Visor Mounted
on Door Glass
ForPowr•SpotFlood-
light 20-inch (508mm)
reflector
PSGN = INGC-PSO (20”) – INGC-PS2A (22”)
PSGV = EVGC-PSFB
2
2
BALLAST COMPONENT LOGIC
LIGHT BALLAST TRUNION
PRODUCT ID. WATTAGE SOURCE VOLTAGE TYPE TYPE OPTIONS
XXXX XX X X X X XXX
51 M 5 A PPSFD 2
NEMA TYPE
LIGHT BALLAST TRUNION BEAM SPREAD OPTICAL
PRODUCT ID. WATTAGE SOURCE VOLTAGE TYPE TYPE HORIZ X VERT REFLECTOR OPTIONS
XXXX XX X X X X XX XXX XXX
51 M 5 A C0
PGD0
PSGV 2
DOOR GLASS/VISOR ASM
ULGV - PSFB
UNIT ID DOOR ASSEMBLY
ULGC = ULGV-PSFB
ULGV = ULGV-PSFB
ULGN = NONE
COMPLETE UNIT NUMBER
NEMA TYPE
LIGHT BALLAST TRUNION BEAM SPREAD OPTICAL
PRODUCT ID. WATTAGE SOURCE VOLTAGE TYPE TYPE HORIZ X VERT REFLECTOR OPTIONS
XXXX XX X X X X XX XXX XXX
51 M 0 A C0 PHD0ULGC
POWR •SPOT
®
ULC
BALLAST COMPONENT LOGIC
LIGHT BALLAST TRUNION
PRODUCT ID. WATTAGE SOURCE VOLTAGE TYPE TYPE OPTIONS
XXXX XX X X X X XXX
51 M 0 A PPSFD
Z
Z
OPTICAL COMPONENT LOGIC
NEMA TYPE
BEAM SPREAD OPTICAL
PRODUCT ID. HORIZ X VERT REFLECTOR
XXXX X XXX
C HDOULGC
Choose reflector ID.
from Ballast and
Photometric Selection
Table on page F-9.
GP0 = General Purpose 20-inch
(508mm) Diameter Optical
HD0 = Heavy Duty 20-inch
(508mm) Diameter Optical
B = NEMA 3X3
C = NEMA 4X4
D = NEMA 5X5
E = NEMA 6X6
Note that this is also used as the reflector ID. It appears on a decal on the
outside bottom of each reflector and can be seen from the ground.
20-inch (508mm) diameter
glare reduction reflector
without door except for
ULGN product
OPTICAL
Optical Component ID is
dependent upon complete Unit
Product ID
UNIT ID OPTICAL ID
ULGC = ULGC
ULGV = PSGC
ULGN = ULGN
Decide whether to use
General Purpose (GP) or
Heavy Duty (HD) Optical
