Network USB over IP Server With 1-USB2.0 Port
4
1. Introduction
1.1 Product Overview
The Network USB over IP Server enhances capability by letting you place your USB devices at
convenient locations directly on the Ethernet network. It’s designed to connect your USB
printers, MFP, and USB storage devices to your network, allowing all network users access to
these USB devices remotely.
1.2 Network Management
The Network USB over IP server supports the WEB management, which remote management
and a warning. A standard WEB server is permanent on its Network USB over IP Servers. Any
standard WEB browser can be used to access and manage the Network USB over IP server.
1.3 Components and Features
1-USB2.0 Port Network USB over IP server
․1 USB2.0 port (High-speed)
․Fast Ethernet network port: RJ-45 for 10Base-T or 100Base-TX
․1 LED to indicate USB status, 1 LED to indicate system status
․One Setup CD for Windows XP, Vista and 7, and User’s Guide
․One external AC power adapter
․Built-in Reset Button
Before you start, you should prepare:
￭ One Windows XP, Vista or 7 computer with CD-ROM drive
￭ The USB device(s) with USB port
1.4 Hardware Installation
Make sure that your USB devices are switched off and that the Network USB over IP Server’s
power adapter is disconnected.
1. Connect the Network USB over IP Server to the router or switch/HUB with the Ethernet
cable.
