Using the Menu System
To access the menu system, press the MENU button. Use the up or down arrow buttons to
scroll up or down; left or right arrow buttons to scroll left or right, or to display submenus;
and OK to change selections. Press MENU to exit a menu and go to the previous menu.
Watching TV
Changing Channels
• If you have both analog and digital cable channels these these are put into the same
channel list. As you change channels, look at the top right corner of the screen to
see what type of channel you’re viewing. Digital channels display a D as part of the
channel, such as D Ch 29.1, while analog channels display an A as part of the channel,
such as A Ch 9.
• Depending upon the type of signals you have connected to your HDTV, you might
notice the channels change slower than you’re used to. This is perfectly normal. Digital
channels sometimes take longer to tune.
Entering Channel Numbers
To tune to a channel, enter the channel number and press OK or wait a few seconds for
the channel to tune. Digital channels can have both primary channels (like the analog
channel number) and subchannels. If 6 is the primary channel and 1 is the subchannel,
for example, the channel looks like 6.1 on screen. To tune to a digital channel with a
subchannel, such as 6.1, enter the primary channel number (6), then press the
SUB CH
button. Enter the subchannel number (1) and press OK.
Changing Screen Formats
Your TV allows you to change the format of the picture you're viewing by pressing the
FORMAT button on your remote. The format changes as you press the FORMAT button
and the format type is displayed at the top of the screen. Depending on the type of signal
you're viewing and your TV's model, a different format might not be available.
Viewing Devices Connected to Your TV
To view devices connected to your TV, press the INPUT button to display the input list.
Choose the input name that matches the input of the device you connected. Your choices
are Composite, S-Video, Component, VGA, and HDMI.
TOCOM 16734970
Make sure you have already connected your TV to devices and a signal source, plugged
in the TV, and put batteries in the remote.
Now, turn on the TV and start the setup.
• Set the Menu Language. If English is your preferred language, skip this step and go
to Set the Signal Source. To choose another language, press the MENU button, then press
the right arrow button to enter the Setup menu. Press the down arrow to highlight Menu
Language, then press the right arrow to choose a language.
• Set the Signal Source. From the Setup menu, press the up or down arrow button to
highlight Signal Source. If you connected Cable to your ANTENNA/CABLE INPUT, the
option is chosen for you and you can press the down arrow button to highlight Auto
Channel Search. If you connected Antenna to your ANTENNA/CABLE INPUT, press the
right arrow button to choose Antenna, and then press the down arrow button to highlight
Auto Channel Search.
• Search Channels. With Auto Channel Search highlighted, press OK to begin the
channel search. The menu shows the TV is running a channel search. Your TV tunes to a
channel once the search is complete. Go to Step 3 Operate Your TV for more information.
Thank you for your purchase. Before making a trip back to the retailer, please visit www.rca.com/television for more information or contact us at 1-800-336-1900 so that we
may assist you in operating the unit, replacing missing parts, and ensuring your satisfaction with the product.
SOUND
ON•OFF
PRESETS
CC
INPUT SUB CH
WATCH TV
FORMAT
VOL
VOL
MUTE
GO BACK FAV
CLEAR
CH -
CH +
VOL- VOL +
MENU OK INFO
INPUT
MENU
FORMAT
SUB CH
Set Up Your TV
Operate Your TV
Setup
u
u
u
u
u
u
u
To Move
u
Signal Source Cable TV
DTV Signal Strength
Auto Channel Search Start
Manual Channel Setup
Channel Labels
Menu Language English
Screen Format Stretch
Favorite Channel Off
OK To Select
MENU To Exit
