Chapter 4
Using the Menu System
The Sound menu lets you adjust audio output. To access the Sound menu, press
MENU on the remote, and then select
This section describes the items available in the Sound menu.
submenu contains the following items:
Sound settings submenu contains the following items:Sound settings
Use the left or right arrow button to center the bar
Left & Right balance Use the left or right arrow button to center the bar Left & Right balance
under the arrow to balance
the left and right speakers.
Use the left or right arrow button to select
Amplifi er Use the left or right arrow button to select Amplifi er
external amplifi er only) or
using the speakers in the HD Monitor).
Set the HD Monitor’s subwoofer to
Subwoofer Set the HD Monitor’s subwoofer to Subwoofer
is using an external subwoofer; or
Press the right arrow button to scroll through the available audio
type Press the right arrow button to scroll through the available audio type
types, which control the way the sound comes through your speakers. The
options available vary according to the input selected.
Splits the incoming stereo audio signal into left and right channels.
Most TV programs and recorded materials have stereo audio. The word
appears in the channel banner when you tune to a program that is
Isolates either the left or right channel of the incoming
Right Isolates either the left or right channel of the incoming Right
Press the right arrow button to scroll through the available audio
Mode Press the right arrow button to scroll through the available audio Mode
modes, which provide special processing through your speakers (depending on
the setting you chose as your
Does not give any special processing, simply provides the mono
Normal Does not give any special processing, simply provides the mono Normal
or stereo sound provided by the signal you're watching.
Available only for mono signals. “Widens” sound from mono
Wide Available only for mono signals. “Widens” sound from mono Wide
broadcasts and mono devices connected to your HD Monitor for a fuller,
Available only for stereo signals. Gives a surround effect with more
Magic Available only for stereo signals. Gives a surround effect with more Magic
Reduces the annoying blasts in volume during commercial
logic Reduces the annoying blasts in volume during commercial logic
breaks, and also amplifi es softer sounds in program material. Eliminates the
need to constantly adjust the volume.
Enhances your HD Monitor's low-frequency response. The
Go back
Sound settings
Sound type
Sound mod
e
Sound logic
Dynamic bas
s
Headphone settings
Graphic equalizer
..
.
Stereo...
Normal...
Medium...
..
.
..
.
Sound
Go back
Left & Right balance
Amplifier
Subwoofer
External...
External...
Settings
