Chapter 2
Using the Remote Control
The Buttons on the Remote Control
Enter time settings directly with the remote control. The
number buttons may also work with other devices if the remote control is programmed
to control those devices.
In VCR mode (if programmed), this button works as a TV/VCR button for
some VCRs. In SAT mode (if programmed), this button works as a TV/SAT button for
some satellite receivers.
Used to highlight different items in the HD Monitor menu and to adjust the
Puts the remote in AUX/HD mode. As a default, this button controls some
models of RCA HDTV Tuners. It can also be programmed to operate some brands of
other remote-controllable devices.
Displays a reduced Closed Captioning menu, allowing you to turn closed
captioning on and off or change the closed captioning mode. Use the up and down
arrow buttons to highlight the setting you want to change. Use the left and right arrow
buttons to change the highlighted setting.
Scans up or down through the HD Monitor's input list. The CH buttons
may also work with other devices if the remote control is programmed to control those
devices. In DVD mode (if programmed), these buttons work as chapter advance or
chapter reverse buttons with some DVD players.
Removes any menu or display from the screen and returns you to normal
CLEAR Removes any menu or display from the screen and returns you to normal CLEAR
Puts the remote in DVD mode and, if Autotuning is enabled, will turn on the HD
Monitor and tune to the correct input channel.
Changes the current format (aspect ratio and magnifi cation) of the image on
In TV mode, the FREEZE button freezes the picture on some input signals.
Press any button on the remote
to resume normal viewing. The FREEZE feature
automatically times out after a short time. Please note that when you "unfreeze" you go
back to live programming (skipping any programming that occurred during the freeze).
The FREEZE feature does not work on signals from the DVI-HDTV or CMP1
inputs in progressive scan (480p) or HDTV (1080i) modes.
Do not use the Freeze feature for an extended period of time. This can cause the
image to be permanently imprinted on the picture tube. Such damage is not covered
by your warranty. Press any button to unfreeze the picture at any time.
Returns you to the previous input channel.
GO BACK Returns you to the previous input channel.GO BACK
Channel Guide menu. Channel Guide
Indicates the programming mode when programming the remote to control
devices. The indicator lights up when you press a valid button on the remote. It fl ickers
when the remote batteries are low and you press a button.
Brings up channel banner; press again to clear the screen.
Press to toggle through the available input sources (VID1, VID2, FRNT, CMP1
MENU Brings up the Main menu.MENU
