Connections & Setup
Chapter 1
Plug the fl at end of the cable into the power jack on the back of the HD Monitor.
Then plug the other end of the power cord into an appropriate wall outlet. Be
sure to insert the plug completely. Do not plug the HD Monitor into an outlet
controlled by a light switch.
• Remove the battery compartment cover from the back of the remote by
pushing the tab and lifting off the cover.
• Insert 2 fresh batteries. Make sure the polarities (+ and -) are aligned correctly.
How to Use the Remote Control to
Complete the Initial Setup
The technical term is “Navigation” – how you move through the on-screen menus.
The theory is the same throughout the menu screens: highlight your choice and
To highlight a menu item, press the arrow buttons on the remote to highlight one
of the items listed on the screen. Use the up or down arrow button to move up or
down. Use the right or left arrow button to move right or left.
To select the item that you’ve highlighted, press OK.
Highlighted means that the menu item stands out from other menu
items on the list (appears darker, brighter, or a different color).
TV on the remote, or press the Power button on the HD Monitor’s front
Pressing the TV button turns on the HD Monitor and puts the remote
into TV mode. “TV mode” means that the buttons on the remote control
operate the HD Monitor’s functions.
