ENGLISH
4
1 Connect the Hardware
1 Using an Ethernet cable, connect the ETHERNET port to a computer for initial
configuration.
2 Connect the POWER 12VDC socket to a power source using only the included power
adaptor.
" Connect the NWA-3500’s ETHERNET port to an Ethernet jack with network
access after you have completed the initial configuration.
1.1 LEDs
The WDS/SYS LED blinks red while the NWA-3500 is starting up. When the NWA-3500 is
ready, the ZyAIR LED turns on and blinks when there is traffic.
