Chapter 2 The Web Configurator
VMG8924-B10A and VMG8924-B30A Series User’s Guide
32
Routing Static Route Use this screen to view and set up static routes on the Device.
DNS Route
Use this screen to forward DNS queries for certain domain names
through a specific WAN interface to its DNS server(s).
Policy
Forwarding
Use this screen to configure policy routing on the Device.
RIP
Use this screen to configure Routing Information Protocol to
exchange routing information with other routers.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Policer Setup Use these screens to configure QoS policers.
NAT Port Forwarding Use this screen to make your local servers visible to the outside
world.
Applications Use this screen to configure servers behind the Device.
Port Triggering Use this screen to change your Device’s port triggering settings.
DMZ Use this screen to configure a default server which receives packets
from ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Address Mapping Use this screen to change your Device’s address mapping settings.
Sessions Use this screen to configure the maximum number of NAT sessions
each client host is allowed to have through the Device.
DNS DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP
address.
Interface
Group
Use this screen to map a port to a PVC or bridge group.
USB Service File Sharing Use this screen to enable file sharing via the Device.
Media Server Use this screen to use the Device as a media server.
Printer Server Use this screen to enable the print server on the Device and get the
model name of the associated printer.
Power
Management
Power
Management
This screen is only available for supervisors. Use this screen to
manually turn on/off specific interface(s) and/or all LEDs
immediately.
Auto Switch Off This screen is only available for supervisors. Use this screen to
configure schedules to have the Device automatically turn on/off
specific interface(s) and/or all LEDs.
Security Settings
Firewall General Use this screen to configure the security level of your firewall.
Protocol Use this screen to add Internet services and configure firewall rules.
Access Control Use this screen to enable specific traffic directions for network
services.
DoS Use this screen to activate protection against Denial of Service (DoS)
attacks.
MAC Filter Use this screen to block or allow traffic from devices of certain MAC
addresses to the Device.
Table 3 Navigation Panel Summary (continued)
LINK TAB FUNCTION
