Verify Password: re-enter the new password to verify its accuracy.
Click Change button to save the changes.
Router Protocol Host Name
Host Name is the system wide device identifier. It is reported by SNMP Agent to
authorized management stations.
Host Name: specify the system identity. Click Change button to save the changes.
Logo Customization
Use this section to enable and upload your custom logo on the device user interface.
The logo must conform to these limitations:
•
The size limit of the logo is 50Kb.
•
The maximum height of logo should be 70 pixels.
•
Only .gif format images are accepted.
To upload new logo, enable logo customization and specify the location of logo file:
Enable Custom Logo: control will enable logo customization. Deselecting this option the
custom logo will be removed and the default Ubiquiti logo will be restored. Logo Target
URL: specify the target URL of custom logo. Target URL is opened when clicking on
custom logo. Logo File: click Browse… button to navigate to and select the logo file or
specify the full path and click the Upload button.
UI Language Selection
Use this section to change the language setting ogf the web management interface.
Firmware
Use this section to find out current software version and update the device with the
new firmware. The device firmware update is compatible with all configuration
settings. When the device is updated with a newer version or the same version
firmware builds, system configuration will be preserved.
Firmware version: displays version of the current firmware. Upgrade…: click to load the
device firmware upgrade window. After the Upgrade… button is clicked the new
Firmware Upload pop-up window will be displayed:
Current Firmware: displays version of the current firmware. Firmware File: click the
Browse… button to specify the new firmware image location or specify the full path
