English
1
Installation
Note: The product model shown in this QIG isTL-WR740N, as an example.
Troubleshooting
1. How can I configure my Router without the Resource CD?
1) Connect your computer to the Router with an Ethernet cable.
2) Set the IP address of your wired network adapter as ‘Automatically’.
3) Open your web browser and type in the default login address referring to
the label on the back of product. You can also try typing http://192.168.1.1
or http://192.168.0.1
to access the Router directly.
4) The default username and password are both admin.
5) If you have changed the username or password and can not remember it,
you will need to restore your Router’s configuration to its factory default
settings then use the default username and password.
Insert the provided Resource CD into your CD-ROM drive. Then the
Setup Wizard will automatically pop up on your computer’s screen.
The Easy Setup Assistant
will automatically pop up on
your computer’s screen.
Click START, and then
follow the step-by-step
instructions until you
complete the configuration
Please select your product
model and click Easy
Setup Assistant
