TL-MR3020 Portable 3G/3.75G Wireless N Router
-207-
)
Note:
Limited by local law regulations, version for North America does not have region selection
option.
¾ Channel Width - Determines the channel width to be used. It is unnecessary to change
the default value unless required.
¾ Enable Wireless Radio - Select or deselect this check box to allow or deny wireless
stations to access the device.
Click the Survey button to detect the SSIDs in the local area.
)
Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.
3) Repeater: This mode allows the AP with its own BSS to relay data to a root AP to which it
is associated with WDS enabled. The wireless repeater relays signal between its stations
and the root AP for greater wireless range.
Figure 6-9 Wireless Settings in Repeater mode
¾ MAC of AP - Enter the MAC address of the root AP of which you want to expand wireless
range.
¾ Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the device can be used. It may be illegal to use the wireless
function of the device in a region other than one of those specified in this field. If your
