TL-MR3020 Portable 3G/3.75G Wireless N Router
-6-
Chapter 2. Connecting the Router
2.1 System Requirements
¾ 3G/3.75G Mobile Broadband Internet Access Service (With a UMTS/HSPA/EVDO USB
dongle)
¾ PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors
¾ TCP/IP protocol on each PC
¾ Web browser, such as Microsoft Internet Explorer 5.0 , Netscape Navigator 6.0 or above
2.2 Installation Environment Requirements
¾ Place the Router in a well ventilated place far from any heater or heating vent
¾ Avoid direct irradiation of any strong light (such as sunlight)
¾ Keep at least 2 inches (5 cm) of clear space around the Router
¾ Operating Temperature: 0 ~40 (32 ~104 )℃℃℉ ℉
¾ Operating Humidity: 10%~90%RH, Non-condensing
2.3 Connecting the Router
The Router supports three modes, 3G router mode, WISP mode and AP mode. You can deploy
the mode appropriate to your actual network environment. To connect the Router, please take
the following steps for different modes.
a. 3G Router Mode
In 3G router mode, with a 3G modem/card, this Router can join a 3G network as well as act as a
wireless central hub to broadcast its SSID. Thus, the other wireless devices can connect to the
Router so as to join the same 3G network.
