TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
This
page allows you to configure basic features of the wireless LAN interface. You can enable or
disable the wireless LAN interface, hide the network from active scans, set the wireless network
name (also known as SSID) and restrict the channel set based on Region requirements.
Enable Wireless: If you want to use wireless features, you must select “Enable Wireless”. If
you deselect “Enable Wireless” option, all the Wireless settings below will be disabled.
Hide SSID Broadcast: When wireless clients survey the local area for wireless networks to
associate with, you can select this option to avoided being surveyed.
Clients Isolation: Select this option to enable AP isolation function so that stations associated
to the AP will not be able to communicate with each other.
Wireless Network Name: Wireless network name shared among all points in a wireless
network. The SSID must be identical for all devices in the wireless network. It is case-sensitive
and must not exceed 32 characters (use any of the characters on the keyboard). Make sure
this setting is the same for all stations in your wireless network. Type the desired SSID in the
space provided.
BSSID: Show the MAC address of the router.
Country: Restrict the channel set and transmit power.
Click Apply/Save to save your settings.
4.6.2 Security
Choose “Wireless””Security”, you will see the screen of Wireless--Security settings shown as
below. You can configure security features of the wireless LAN interface by manually setting the
network authentication or through WPS (Wi-Fi Protected Setup) method.
Figure 4-70
63
