11N Wireless Broadband Router User Guide

¾ WPS settings: To enable or disable WPS function. The default is “Enable”.

¾ WPS mode: Provide two ways: PBC (Push-Button Configuration) and PIN code.

¾ PBC: Select the PBC and click Ok, or press and hold the WPS button on the back

panel of the device for about one second. The WPS LED indicator will be flashing for

2 minutes, which means the WPS is enabled. During this time (flashing WPS LED),

you can enable the wireless client to implement the WPS/PBC negotiation between

them. When the WPS connection is completed, the LED indicator will be

continuously lit. To add more clients, repeat the above steps.)

¾ PIN: If this option is enabled, you need to enter a wireless client’s PIN code in the

field and keep the same code in the WPS client.

¾ Reset OOB: Press this button, the WPS client will be in an idle state, and the WPS

indicator will turn off. AP will not respond to the WPS client’s connection request and

will set the security mode as Open-None (Disable) mode.

NOTE:

The use of WPS function requires the wireless adapter to support this function.

5.2.2 WPA- PSK

WPA guarantees to protect WLAN users’ data and only the authorized network users can

have access to WLAN.