11N Wireless Broadband Router User Guide
¾ AUTO: Use this default value unless you are connecting an excessively long cable,
which may degrade drive capability, to your router’s WAN port.
¾ 10M HALF-duplex: Select this value if your router’s WAN port does not function
properly when connected to an Ethernet cable; it may be caused by degraded drive
capacity due to the cable’s excessive length.
¾ 10M FULL-duplex: Select this value to improve WAN port drive capacity.
¾ 100M HALF-duplex: Select it to set router’s WAN port to work at 100Mbps in half
duplex mode.
¾ 100M FULL-duplex: Select it to set router’s WAN port to work at 100Mbps in full
duplex mode.
26
