Concurrent Dual Band Wireless N600 Gigabit Router
To update firmware, do as follows:
1. Click "Browse” to locate the firmware and "Upgrade” to update.
2. Router will reboot automatically when upgrade completes.
NOTE: Do not disconnect the device from your management PC (the PC you use to
configure the device) or power off it during the upgrade process; otherwise, it may
be permanently damaged. The device will restart automatically when the upgrade
process, which takes several minutes, completes.
4.8.3 Backup/Restore Settings
This section allows you to backup current settings or to restore the previous
settings configured on the device.
Backup Settings: Once you have configured the device the way you want it,
you can save these settings to a configuration file on your local hard drive that
can later be imported to your device in case that the device is restored to
factory default settings. To do this, click the “Backup” button and specify a
directory to save settings on your local hardware.
Restore Settings: Click the "Browse" button to locate and select a
configuration file that is saved previously to your local hard drive. And then
click the "Restore" button to reset your device to previous settings.
62
