Connecting the Wireless Keyboard
Your VAIO
®
computer is supplied with a wireless keyboard
1
. Before attempting to use the wireless keyboard, you must
enable communication between the computer and the keyboard. To connect your wireless keyboard, it must be within 11
inches of the computer
2
When attempting to connect the wireless keyboard, confirm that the AA batteries (supplied) are properly inserted into
the keyboard before your computer is turned on.
To connect the wireless keyboard
1.
Turn on your computer by pressing the power button.
2.
For the keyboard model, VGC-WKB1, slide the power switch to the On position. The power switch is located on
the side of the keyboard.
3.
Immediately press the CONNECT button, located on the right panel of the computer.
4.
Turn the wireless keyboard over.
5.
Press the CONNECT button
3
on the bottom of the keyboard, to activate communication between the wireless
keyboard and the computer.
Connecting the keyboard
Additional information about using a wireless keyboard
The wireless keyboard requires unobstructed communication with the system unit for proper operation.
To maintain good communication, operate your wireless keyboard within the distance limitations of keyboard
1
.
Confirm that the supplied AA batteries are properly installed.
Press the CONNECT button located on the right panel of the computer first, and then press the Connect button on
the bottom of the keyboard.
Verify the infrared receiver on the computer's front panel is free of obstructions that may prevent proper operation.
Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near your wireless
keyboard. These devices may cause interference, causing your keyboard to stop working properly.
Page 58
