Cautions
Follow the cautions below when using this unit.
z The unit is affected by the environment in which it is installed. Do not install your unit
in the following area.
−Dusty areas
If dust enters the internal parts of the unit, damage or poor-quality output can
result.
−Areas in direct sunlight
Direct sunlight can distort the plastic parts of the unit and result in poor-quality
output.
−Excessively hot, cold, humid, or dry areas (for example, near heaters, humidifiers,
or air conditioners)
This may result in damp paper, condensation within the internal mechanisms,
misfeeds, and dirty output.
z Operating Conditions
Temperature : 10-35 degrees Celsius (50-95 degrees Fahrenheit)
Relative humidity : 20%-85%
Note : When the temperature reaches 30 degrees Celsius (86 degrees Fahrenheit),
the relative humidity must be 60% or less.
z The power outlet should be installed near the equipment, and should be easily
accessible.
z When moving the unit, be sure to first turn the power button off, and then remove the
power cord from the outlet.
z Place the unit on a firm, level surface.
z Be sure to use only ink tanks of SHARP genuine supplies.
z If you get ink spots on your skin, wash them with water as soon as possible.
z Store the spare ink tanks out of the reach of children.
