Page 3-10 Administrator Guide
Network Installation Using Internet Services
SNMP
Use these instructions to configure the Simple Network Management Protocol (SNMP) using
Web Image Monitor Type 103.
Configure SNMP
To configure SNMP, perform these steps:
¾ Enable Web Image Monitor Type 103 (see “Enabling Internet Services” on page 3-5).
¾ At the Web Image Monitor Type 103 Home Page for the Type 103, select the [Network
Settings] tab.
¾ Select [SNMP] and check the Protocol Configuration details are correct. If any of the
details are incorrect then enter the correct information.
¾ Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
SNMP Traps
1
2
3
4
Parameter Name Description Default
Maximun
Length
Enable Authentication
Traps:
Enable or disable the
authentication traps.
ON
Enable Address Pair 1 to
5
Enable/Disable the IP Address
and community name.
OFF
IP Address 1 to 5 the IP Address of the host to
which the SNMP Traps should be
directed.
0.0.0.0
Community Name 1 to 5 The community name to which
the host belongs.
NULL 14
