3.5 Advanced Setup
Click “Advanced Setup” to enter the advanced system setup interface. By default, there
are two options at the left side of the interface: “WAN”, “LAN”, etc. See the following
interface.
If the ROUTER is configured to a routing mode, such as built-in PPPOE access, there
will be more options at the left: “LAN”, “WAN”, “NAT”, “Security”, “Routing”, “DNS”,
“DSL” and so on.
3.5.1 WAN
Click “WAN” to show the following interface. In this interface, you can modify and
configure the WAN interface.
Note: After PVC is deleted or modified, the system must be rebooted, or the modification
will not be effective.
25
