Produtos da Marca Panasonic

IP Network Settings

To properly connect the unit to an IP network, the

following settings must be set to match the settings of

the IP network. Consult your system administrator for

the appropriate settings.

– IP address mode: Automatic (DHCP) or manual

(static) IP address assignment (default: static)

– IP address (when static connection mode is

selected; default: 192.168.0.2)

– Subnet mask (when static connection mode is

selected; default: 255.255.255.0)

– Default gateway (when static connection mode is

selected; default: 0.0.0.0)

Note

• IP addresses can be entered using the keypad.

[0]–[9] are used to enter numbers and [ ] is

used to enter a period. For example, to enter

"192.168.0.1", press [192 168 0 1].

Automatic Assignment (DHCP)

1. Press [MENU].

2. Select "IP Network Settings", then press

SELECT

3. Select "IP Address Mode", then press

SELECT

4. Select "DHCP", then press

SAVE

5. Press [MENU].

Note

• If this setting is changed, the unit must be

restarted before the new setting becomes

effective (see page 47).

• To confirm the IP address, press

[MENU]®"Show IP Address"®

SELECT

Manual Assignment (Static)

1. Press [MENU].

2. Select "IP Network Settings", then press

SELECT

3. Select "IP Address Mode", then press

SELECT

4. Select "Static", then press

SAVE

5. Select "IP Address", then press

SELECT

6. Enter the IP address to be assigned to the unit, then

press

SAVE

7. Select "Subnet Mask", then press

SELECT

8. Enter the subnet mask, then press

SAVE

9. Select "Default Gateway", then press

SELECT

10. Enter the IP address of the default gateway, then

press

SAVE

11. Press [MENU].

Note

• If this setting is changed, the unit must be

restarted before the new setting becomes

effective (see page 47).

• To confirm the IP address, press

[MENU]®[Show IP Address]®

SELECT

Document Version 2011/06 Operating Instructions 27

Preparation