4-3 P (Park) Position Release Procedure

If you need to release the vehicle from the P (Park) position, proceed as follows. When power switch is

turned OFF or 12V battery is low, LEAF automatically shifts to P position.

NOTE:

This procedure requires two (2) people.

1. To start the EV system with a booster battery, refer to

4-1 Jump Starting.

2. Turn power switch ON by pushing the power switch 2 times without pressing brake pedal.

3. Confirm parking brake is ON (indicator in electric parking brake switch will be ON).

4. Place the selector lever in the N (Neutral) position.

5. Close all doors and press the brake pedal.

6. Remove the following 3 fuses:

• PBW MTR-1 20A (under hood fuse box behind 12V battery)

• PBW MTR-2 20A (under hood fuse box behind 12V battery)

• METER 1 10A (in the cabin fuse box)

Under Hood Fuse Box Location