5
Right clicking on the PicoJet Icon and
choosing Printing Preferences, then
selecting the Utilities Tab will show
the current revision of the drivers.
Note the info above the TEST PRINT
button.
The drivers need to be set up correctly.
The most important
one is Print
Directly to the Printer.
This is found by right clicking on the
PicoJet Icon, and selecting Properties.
Then choose the Advanced Tab.
Click in the circle next to “Print
Directly to the Printer.” Be sure to
click apply before clicking OK.
Installing the Picojet
Drivers on a “Graphics
PC” for generating PRN
files.
If you are generating PRN files to print with on your PicoJet Printer, and prefer
to generate them on a separate computer other then the duplicator itself. The
other PC (“graphics pc”) will need to have the PicoJet Drivers installed as well
as the SureThing CD Labeler Application.
To install the drivers on your “graphics pc” you’ll need the PicoJet Drivers
either on the included CD-R or download from the MF Digital Website.
You can then use the Add a Printer Wizard to install the drivers, however at the
prompt asking for which PORT the printer is connected to, select the LPT1 Port.
Doing this will keep the PicoJet Printer Icon, online. Then continue with the
wizard, at the screen asking for the driver files, click the HAVE DISK and point
the dialog via the BROWSE button to the X:/enu/drivers/win2kxp folder.
Where X is the location of the drive the drivers are located on.
The prompts you will see will be those shown above. Be sure to set the printer
to “print directly to the printer” as shown in the very last step of this guide.
