AP-1301 i/t
Operator’s Guide
Document Revision: 100102
Page 6
Setup
Before the unit can be operated, you will need to setup the different
components.
What you will need
You will need the following
• MediaFORM AP-1301 base unit
• MediaFORM Spectrum2 CD Printer (Requires the MediaFORM AP-
1301t PDS docking station) or Primera Signature III or IV printer (AP-
1301i).
• Parallel printer cable (included with printer)
• Various included cables
• Quality blank CD-R’s. Thermal white printable is recommended for the
AP-1301t and Ink Jet White Printable for the Ap-1301i. While the use
of media with adhesive labels may work, it is not recommended nor
supported.
• SVGA monitor (Sold Separately) capable of a minimum 800 x 600
resolution at 75Hz.
• Keyboard with DIN style connector (Sold Separately)
