Dil ID: 12
Dil Adı: portugal
Dil Kodu: pt4tayfun Produtos da Marca Jeep
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



You may also calibrate the compass by completing one or more 360 degree turns (in
an area free from large metal or metallic objects) until the “CAL” message displayed
in the EVIC turns off. The compass will now function normally.
PROGRAMMABLE FEATURES
Electronic Vehicle Information Center (EVIC) If Equipped
The EVIC can be used to program the following Personal Settings. Press and release
the MENU button until Personal Settings displays, then press the DOWN
button
to scroll through the settings. Press the SELECT button to change the
setting.
Language Turn Headlamps On With Remote Key
Unlock
Lock Door Automatically at 15 mph
(24 km/h)
Confirmation of Voice Commands
Auto Unlock On Exit Illuminated Approach
Remote Unlock Driver's Door 1st Hill Start Assist (HSA)
Sound Horn With Remote Key Lock Display Units In
Flash Lights With Remote Key Lock Automatic Compass Calibration
Delay Turning Headlights Off Compass Variance
Delay Power Off to Accessories until
Exit
To Set the Variance
Key Fob Programmable Features
The following features may also be programmed by using the Key Fob transmitter or
the ignition switch and driver's door lock switch.
NOTE: Pressing the LOCK button while you are inside the vehicle will activate the
Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will
cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security
Alarm.
Unlock On First Press
To unlock either the driver's side, or all doors, on the first press of the UNLOCK
button:
Press and hold the LOCK button for at least 4 seconds, but no longer than
10 seconds. Then, press and hold the UNLOCK button while still holding the
LOCK button.
Release both buttons at the same time.
Auto Unlock Doors On Exit
To have all of the vehicle doors unlock when any door is opened:
Enter your vehicle and close all the doors.
Cycle the ignition switch between LOCK and ON and then back to LOCK four
times, ending up in the LOCK position (do not start the engine).
ELECTRONICS
38