6 7
What to Do
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Monitors the vehicle’s tire pressures.
1. Visually inspect the tires for damage.
2. Use a tire air pressure gauge to
check which tire(s) have low
pressure.
3. Inflate the tire(s), if necessary, to the
recommended pressures listed on
the label on the driver’s doorjamb.
4. Start TPMS calibration.
Turning ECON Mode On/Off
3. Check the i-MID for the
system status.
4. Press ECON again to turn the
system off.
ECO ASSIST
TM
When turned on, performance of the vehicle’s engine, transmission, cruise control, and
air conditioning system are adjusted to maximize fuel efficiency.
2. The ECON mode indicator
comes on.
Ambient Meter
High fuel efficiency Moderate fuel efficiency Low fuel efficiency
1. Press ECON.
How It Works
Indicates real-time fuel efficiency using color-coded bars.
When the tire pressure drops
significantly below recommended
levels, the low tire pressure
indicator comes on.
If a message also appears on
the i-MID, there may be a
problem with the system.
See your dealer.
This feature can be turned off in the Customize Settings Menu. See your Owner’s
Manual for more information.
What to Do
1. Press MENU.
2. Select Customize Settings.
3. Select TPMS Calibration.
4. Select Initialize.
5. Select Yes.
Calibration begins and will finish automatically.
The process takes about 30 minutes of driving
30-60 mph.
6. Press MENU to exit.
Any time you inflate, change, or rotate one or more of your tires, you need to
recalibrate the system. Use the buttons on the steering wheel to operate the
Vehicle Menu (see page 5).
14 Civic 2D TRG_LX_ATG_NEW STYLE 11/5/2013 11:28 AM Page 5
