Replacing the Antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align and adhere the antennas to the display-panel base.
2 Route the antenna cables under the camera cable and connect the
cables to the wireless card.
3 Route the camera cable through the routing guides on the display-panel
base.
Post-requisites
1 Replace the system-board shield.
2 Replace the back cover.
3 Follow the procedure from step 3 to step 5 in “Replacing the Stand
Assembly”.
45
