© Henri DEPAEPE SAS – France
3.4 Security
The key lock feature can be set by selecting menu ”Settings →Automatic key lock”. The current
used setting is displayed when highlighting the menu “Automatic key lock”. A list of selectable
timeouts options from Off to 5 minutes is available.
The keys will automatically be locked when the selected Key Lock Timeout has expired without any
input.
You have to unlock the keys by pressing and entering the PIN code. Only emergency numbers
(e.g. 911 or 112) can be called without the user has to unlock the keys.
In ”… →Change PIN” the handset security PIN code can be changed.
3.5 Handset name
The handset name can be changed by selecting menu “Settings → Handset name”. An editor is
displayed when entering the menu. The handset name is typed in by using the numeric keys and
afterward saving the name. The handset name is displayed on the idle display.
3.6 Reset settings
The handset name can be reset to default settings by selecting menu “Settings → Reset settings”.
The base is not reset to default when selecting this feature. The handset is still registered after a
reset.
3.7 Status
The menu “Settings → Status” delivers some useful information to the end user. The displayed
information’s are:
3.8 Auto answer
The feature can be selected via menu “Settings → Auto answer”.
“… → Normal”
The user must always press “Green-key (Off-hook) to answer a call. The call is not answered by
removing the handset from the cradle/charger.
“… → Any Key”
Pressing any key will answer an incoming call. The call is not answered by removing the handset
from the cradle/charger.
“… → Automatic”
If the feature “Automatic” is enabled on the handset, then the incoming call is answered automatic
after 5 seconds.
Base station:
- Software version
- Hardware version
- IP address
- MAC address
- System name
Handset status:
- Software version
- Hardware version
- DECT band
- Battery level
- IPEI
