Replacing Drives: Dell XPS 430 Service Manual
drives.htm[4/15/2014 11:28:30 AM]
a. Remove the drive panel insert (see Replacing the Drive-Panel Insert).
b. Remove the Media Card Reader from its packaging.
c. Remove the shoulder screws from the inside of the drive-panel insert and attach the screws to the new Media
Card Reader.
1 Media Card Reader 2 screws (4)
d. Gently slide the Media Card Reader into the drive bay, till it clicks in securely.
NOTE: Ensure that the Media Card Reader is installed before connecting the USB cable.
e. Connect the USB cable to the back of the Media Card Reader and to the USB connector (FLEXBAY) on the system
board (see System
Board Components).
8. Replace the drive panel (see Replacing the Drive Panel
).
9. Replace the computer cover (see Replacing the Computer Cover).
10. Turn on the system and enter system setup (see System Setup).
If you removed a Media Card Reader — Set the USB for FlexBay value to OFF.
If you installed a Media Card Reader — Set the USB for FlexBay value to ON.
Back to Contents Page
