Produtos da Marca Dell

Back to Contents Page

 Memory Module(s)

Dell™StudioXPS™9100ServiceManual

Removing the Memory Module(s)

Replacing the Memory Module(s)



Removing the Memory Module(s)



1. Follow the instructions in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Locate the memory module(s) on the system board (see System Board Components).



4. Press out the securing clip at each end of the memory module connector.



5. Grasp the memory module and pull it upwards.

If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the connector.

Replacing the Memory Module(s)



1. Follow the instructions in Before You Begin.



2. Press out the securing clip at each end of the memory module connector.



WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

memory module connector

securing clip

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: Do not install ECC memory modules.

CAUTION: If you remove your original memory module(s) from the computer during a memory upgrade, keep them separate from any new

memorymodule(s)thatyoumayhave,evenifyoupurchasedthenewmemorymodule(s)fromDell™.Ifpossible,donotpairanoriginalmemory

module with a new memory module. Otherwise, your computer may not start properly. The recommended memory configurations are: matched

memory module(s) installed in DIMM connectors 4, 5, and 6 and another matched memory module(s) installed in DIMM connectors 1, 2, and 3.