Produtos da Marca Dell

Back to Contents Page

 Badge Back-Light Module

Dell™StudioXPS™9100ServiceManual

Removing the Badge Back-Light Module

Replacing the Badge Back-Light Module



Removing the Badge Back-Light Module



1. Follow the instructions in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Remove the front bezel (see Removing the Front Bezel).



4. Remove the two screws that secure the hinge to the front bezel.



5. Pull the hinge away from the front bezel.



6. Remove the badge back-light cable from the securing tabs.



7. Press the tabs away from the badge back-light module and pull the badge back-light module away from the front bezel.

Replacing the Badge Back-Light Module



1. Follow the instructions in Before You Begin.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

badge back-light module

tabs (3)

badge back-light cable

screws (2)

hinge