Produtos da Marca Dell

Back to Contents Page

 Bluetooth Assembly

Dell™StudioXPS™7100ServiceManual

Removing the Bluetooth Assembly

Replacing the Bluetooth Assembly



Removing the Bluetooth Assembly



1. Follow the instructions in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Remove the front bezel (see Removing the Front Bezel).



4. Disconnect the Bluetooth®assembly cable from the system board connectors, PWRSW1 and F_USB4 (see System Board Components).



5. Press in on the tab as shown in the illustration and pull the Bluetooth assembly away from the front panel.



6. Carefully slide and remove the Bluetooth assembly cable through the slot in the front panel.



7. Set the Bluetooth assembly aside in a secure location.

Replacing the Bluetooth Assembly



1. Follow the instructions in Before You Begin.



WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

Bluetooth assembly

Bluetooth assembly tab

Bluetooth assembly cable

front panel