Primary Video Controller determines whether the system looks for a video card in a PCI slot during the boot routine. When Auto is selected, the
system uses any PCI video card it finds during the boot routine. If no PCI video card is found, the system uses the video card in the Accelerated
Graphics Port (AGP) slot. When AGP is selected, the system uses the video card in the AGP slot as the primary video controller. If you have both a
PCI and an AGP card, setting this option to Auto designates the PCI card as primary video; setting it to AGP designates the AGP card as primary
video.
Remote Wake Up
Remote Wake Up allows you to set the Remote Wake Up feature to On or Off. You must reboot your system before a change takes effect.
Report Keyboard Errors
Report Keyboard Errors enables or disables reporting of keyboard errors during the power-on self-test (POST), which is a series of tests that
the system performs on the hardware each time you turn on the system or press the reset button.
This option is useful when applied to self-starting servers or host systems that have no permanently attached keyboard. In these situations,
selecting Do Not Report suppresses all error messages relating to the keyboard or to the keyboard controller during POST. This setting does not
affect the operation of the keyboard itself if a keyboard is attached to the computer.
Second Processor
Second Processor enables or disables a second processor for troubleshooting purposes. If the system is having processor-related problems,
you can disable the second processor to see if the problem is isolated to this processor. This option appears only if the system has two
processors.
System Data
The following information about the system is displayed in the system data area of the System Setup screen:
l The processor type and BIOS level.
l The size of the integrated L2 cache.
l The system's five-character service tag number, which was programmed into NVRAM by Dell during the manufacturing process. Refer to this
number during technical assistance or service calls. The service tag number is also accessed by certain Dell support software, including the
diagnostics software.
System Date
System Date resets the date on the computer's internal calendar.
Your system automatically displays the day of the week corresponding to the settings in the month, day-of-month, and year fields.
To change the date, press the left- or right-arrow key to select a field, and then press plus (+) or minus (–) to increase or decrease the number. If
you prefer, you can type numbers in the month, day-of-month, and year fields.
System Memory
System Memory indicates the entire amount of installed memory detected in your system. After you add memory, check this option to confirm that
the new memory is installed correctly and is recognized by the system.
System Security
System Security configures the following password and chassis intrusion options:
l System Password
l Password Status
l Setup Password
