Dil ID: 12
Dil Adı: portugal
Dil Kodu: pt6tayfun Produtos da Marca Dell
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi
Anasayfa > Marcas > Dell > Computador > Precision 390
Back to Contents Page
Advanced Features
DellPrecision™Workstation390User'sGuide
LegacySelect Technology Control
Manageability
Security
Password Protection
System Setup
Clearing Forgotten Passwords
Clearing CMOS Settings
Power Management
Hyper-Threading
IEEE 1394
About RAID Configurations
LegacySelect Technology Control
LegacySelect technology control offers legacy-full, legacy-reduced, or legacy-free solutions based on common platforms, hard-drive images, and help desk
procedures.Controlisprovidedtotheadministratorthroughsystemsetup,DellOpenManage™ITAssistant,orDell™customfactoryintegration.
LegacySelect allows administrators to electronically activate or deactivate connectors and media devices that include serial and USB connectors, a parallel
connector, a floppy drive, PCI slots, and a PS/2 mouse. Connectors and media devices that are deactivated make resources available. You must restart the
computer to effect the changes.
Manageability
Alert Standard Format
ASF is a DMTF management standard that specifies "pre-operating system" or "operating system-absent" alerting techniques. The standard is designed to
generate an alert on potential security and fault conditions when the operating system is in a sleep state or the system is powered down. ASF is designed to
supersede previous operating system-absent alerting technologies.
Your computer supports the following ASF alerts:
For more information about Dell's ASF implementation, see the ASF User's Guide and the ASF Administrator's Guide, which are available on the Dell Support
website at support.dell.com.
DellOpenManage™ITAssistant
IT Assistant configures, manages, and monitors computers and other devices on a corporate network. IT Assistant manages assets, configurations, events
(alerts), and security for computers equipped with industry-standard management software. It supports instrumentation that conforms to SNMP and CIM
industry standards.
Dell OpenManage Client instrumentation, which is based on CIM, is available for your computer. For information on IT Assistant, see the Dell OpenManage IT
Assistant User's Guide available on the Dell Support website at support.dell.com.
Description
The BIOS has been corrupted or the BIOS corruption has been resolved.
No bootable devices were found when attempting to boot
The BIOS did not complete loading upon initiation.
The system password is invalid (alert occurs after three failed attempts).
A chassis intrusion has been detected
The microprocessor is not functioning.
Periodic heartbeats have been transmitted to verify system presence.
The computer temperature is out of limits or the computer temperature
problem has been resolved.
The fan speed (rpm) is out of limits or the fan speed (rpm) problem has
been resolved.
The ethernet connectivity is enabled or the ethernet connectivity is
disabled.