Side View
Back View
Back-Panel Connectors
The vents, which are on each side of the computer, allow air to flow through your computer. To ensure proper ventilation, do not block these
cooling vents.
See "Diagnostic Lights" for a description of light codes that can help you troubleshoot problems with your computer.
computer cover release knob
Rotate this knob in a clockwise direction to remove the cover.
The connectors for your computer.
The connector for the power adapter.
The vents allow air to flow through your computer. To ensure proper ventilation, do not block these cooling vents.
Connect a parallel device, such as a printer, to the parallel connector. If you have a USB printer, plug it into a USB connector.
l Green — A good connection exists between a 10-Mbps network and the computer.
l Orange — A good connection exists between a 100-Mbps network and the computer.
l Yellow — A good connection exists between a 1000-Mbps (1-Gbps) network and the computer.
l Off — The computer is not detecting a physical connection to the network or the Network Controller is turned off in system
setup.
Attach the UTP cable to an RJ45 jack wall plate or to an RJ45 port on a UTP concentrator or hub and press the other end of the UTP
cable into the network adapter connector until the cable snaps securely into place.
