Removing and Replacing Parts on the Low-Profile Chassis 4-15
Riser Board
Figure 4-13. Riser Board Removal
To remove the riser board, follow these steps:
1. Remove the expansion-card cage and all expansion cards.
2. Lay the expansion-card cage on a flat work surface with the riser board
facing up.
3. Remove the two riser-board mounting screws.
4. Lift the riser board away from the expansion-card cage.
When you replace the riser board, be sure the alignment feature on the expan-
sion-card cage engages with the alignment slot.
riser board
riser-board mounting
screws (2)
expansion-card
cage
riser-board alignment
slot
