Removing and Replacing Parts: Dell OptiPlex GX1 Systems Service Manual
file:///C|/infodev/2013/eDoc/OpGX1/SM/remsff.htm[2/21/2013 11:45:32 AM]
Microprocessor/Heat Sink Assembly
Figure 28. Microprocessor/Heat Sink Assembly Removal
1 Microprocessor fan
2 Guide bracket assembly
3 Guide-bracket assembly latch
4 Microprocessor/heat sink assembly
CAUTION: The microprocessor SEC cartridge/heat sink assembly can get extremely hot. Be
sure that the assembly has had sufficient time to cool before you touch it.
CAUTION: Use a wrist grounding strap as explained in "Precautionary Measures."
NOTE: Dell recommends that only a technically knowledgeable person perform this procedure.
To replace a microprocessor, perform the following steps:
1. Remove the computer cover
.
2. Locate the microprocessor socket on the system board.
