Installing the Latest Image With a 1 GB Module
NOTE: It is recommended that you follow these steps only if you have to upgrade the
Windows XPE image to A05.
To install the latest image using a 1 GB module:
1
Install the latest Windows XPE image on an OptiPlex FX-160 system with a
2 GB module.
2
Uncompress the disk-image:
a
Navigate to
My Computer
b
Right-click
C:
and select
Properties
.
c
Select the
General
tab.
d
Clear the option
Compress drive to save disk space
.
3
Remove any software that is not required in your client environment. Click
Start
Control Panel
Add/Remove Programs
.
The following software can be uninstalled if they are not used in your client
environment:
• Citrix Online-Plugin Receiver (frees up 20 MB of space)
• VMware View client (frees up 40 MB of space)
• Citrix Online-Plugin from
C:\Dell folder
• Symantec end-point protection software
4
Delete temporary files and folders.
5
Check the total occupied space.
The total occupied space should be around 920 MB and should be less than
the
total size for imaging
in Table 1.
6 Capture the image and redeploy it to other systems with a 1 GB module.
See the Re-Imaging Guide at
content.dell.com/us/en/enterprise/d/business~solutions~whitepapers~en
/Documents~OptiPlex-fx160-imaging-guide.pdf.aspx.
Alternatively, you can upload the new image to the Altiris deployment
server. The new image can be redeployed from the Altiris server to the
existing OptiPlex FX-160 Windows XPE images with a 1 GB module.
A5_techsheet.fm Page 4 Tuesday, January 11, 2011 4:04 PM
