Back to Contents Page

 Power-Button Bracket

Dell™Inspiron™410ServiceManual

Removing the Power-Button Bracket

Replacing the Power-Button Bracket



Removing the Power-Button Bracket



1. Follow the procedures in Before You Begin.



2. Remove the top cover (see Removing the Top Cover).



3. Remove the top bracket (see Removing the Top Bracket).



4. Remove the optical drive (see Removing the Optical Drive).



5. Remove the drive bay (see Removing the Drive Bay).



6. Disconnect the power-button cable from the connector on the system board and lift the power-button bracket off the drive bay.

Replacing the Power-Button Bracket



1. Follow the procedures in Before You Begin.



2. Connect the power-button cable to the power-button connector on the system board (see System Board Components).



3. Replace the drive bay (see Replacing the Drive Bay).



4. Replace the optical drive (see Replacing the Optical Drive).



5. Replace the top bracket (see Replacing the Top Bracket).



6. Replace the top cover (see Replacing the Top Cover).



7. Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page



WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.