3. Replace the screw that secures the I/O bracket to the chassis.



4. Using a hex nut driver, replace the two hex nut screws that secure the VGA connector to the I/O bracket.



5. Replace the three screws that secure the chassis fan to the I/O bracket.



6. Replace the I/O bezel (see Replacing the I/O Bezel).



7. Replace the bottom cover (see Replacing the Bottom Cover).



8. Replace the top bracket (see Replacing the Top Bracket).



9. Replace the top cover (see Replacing the Top Cover).



10. Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page



CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.