Produtos da Marca Dell

Replacing the Mini-Card



1. Follow the procedures in Before You Begin.



2. Align the notch on the Mini-Card with the tab in the system-board connector.



3. Insert the Mini-Card at a 45-degree angle into the system-board connector.



4. Press the other end of the Mini-Card down. Replace the screw that secures the Mini-Card to the system-board connector.



5. Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the Mini-

Card supported by your computer.



6. Replace the drive bay (see Replacing the Drive Bay).



7. Replace the optical drive (see Replacing the Optical Drive).



8. Replace the top bracket (see Replacing the Top Bracket).



9. Replace the top cover (see Replacing the Top Cover).



10. Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page



CAUTION: The connectors are keyed to ensure correct insertion. Use of excessive force may damage the connectors.

CAUTION: To avoid damage to the Mini-Card, ensure that there are no cables or antenna cables under the Mini-Card.

Connectors on the Mini-Card

Antenna Cable Color Scheme

WLAN (2 antenna cables)

Main WLAN (white triangle)

Auxiliary WLAN (black triangle)



white

black

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.