Back to Contents Page

 I/O Bezel

Dell™Inspiron™300/400ServiceManual

Removing the I/O Bezel

Replacing the I/O Bezel



Removing the I/O Bezel



1. Follow the procedures in Before You Begin.



2. Remove the top cover (see Removing the Top Cover).



3. Remove the bottom cover (see Removing the Bottom Cover).



4. Press and release the tabs on the bottom of the I/O bezel from the slots on the chassis and lift the I/O bezel out of the computer.

Replacing the I/O Bezel



1. Follow the procedures in Before You Begin.



2. Align the tabs on the I/O bezel with the slots on the computer and snap into place.



3. Replace the bottom cover (see Replacing the Bottom Cover).



4. Replace the top cover (see Replacing the Top Cover).



5. Connect your computer and all attached devices to electrical outlets, and turn them on.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

tabs (3)

I/O bezel

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.